SOLD     Interceptor 750 Series II Chromed US Tank , "David B" (20 October 2004)
           For Sale RE 700cc twin Right hand (only) Cylinder Head , "David B" (20 October 2004)
           Wanted Interceptor 750 Series II Motor and Trans , "Seppo" (23 February 2004)
           SOLD - 1968 Royal Enfield Interceptor 750 MK 1A , "Robin" (29 January 2004)
           Interceptor specific tools wanted , "Trident"(Wed Nov 12, 2003)
           For Sale / SWAP 1970 Interceptor Rickman Metisse, 750cc Series 11 , "Rob" (30 September 2003)
           For Sale 1968 Royal Enfield Interceptor 750 Series 11 , "Dan" (30 September 2003)
           SOLD- 1970 Royal Enfield Interceptor 750 Series 11 , "Stephen" (25 September 2003)
           For Sale Motorcycle magazines with Interceptor Ad's and articles., "Stephen" (25 September 2003)
           Wanted a set of spare heads., "Rossoman" (24 September 2003)
           For Sale Interceptor Mk 1 - Basket Case, "Glenn" (22 September 2003)
           Rickman SWAP for Interceptor II , "Rob" (22 September 2003)
           SOLD--For Sale Interceptor - Indian 1959, "Glenn" (22 September 2003)
           WANTED US Chromed Tank , and Boranni Rims "Ray" (15 August 2003)
           WANTED Interceptor II , "David" (13 August 2003)
           SOLD-For Sale Interceptor 1A, "Mike" (25 July 2003)
           Wanted Roy Bacon's "Royal Enfield - Post War Models", "Rick" (9 June 2003)
           For Sale 1971 R.E. motor basketcase, Wanted -68 parts, "Andy" (5 June 2003)
           Wanted Original Interceptor, "Reinhard Kopf" (22 July 2003)
           Wanted high rise, wide handlebars, "Dan" (7th April 2003)
           Wanted - Interceptor Timing Cover, "Jack Spivey" (17th March 2003)
           SOLD--Royal Enfield Interceptor Ser II 1969 and spare Engine, "Will" (13 Feb 2003)
           SOLD Load of Interceptor parts., "Wes" (12 February 2003)
           Pair of standard pistons., "Dave" (2 February 2003)

• For Sale:
  Message:
• a chrome
  Interceptor (series 2 I think) gastank with gas cap and jack chain in decent condition, not perfect but quite usable (there are a couple of small dimples and some small rust marks). The threaded holes for the rear mounting bracket (?) look ok but I don't have the bracket itself. .
  
  Best regards !
  Dave Bird

• For Sale:
  Message:
• the head is something that I have come across in a bunch of britsh parts I bought so I don't know much about it. I believe it to be an Interceptor head RE 700cc twin (right side only), but I am just going from the parts books on Hitchcock m/c pages. Overall the condition is good - no broken fins and generally quite clean but no valves or springs or covers just the rockers.
  
  Best regards !
  Dave Bird

• Wanted:
  Message: I´m looking for Royal Enfield Interceptor II Motor, transmission and gearbox, model 1969-1970. located anywhere in the world.
  
  Best regards !
  Seppo Toivola City: Lappeenranta Country: Finland

• For Sale:
  Message: For Sale: 1968 Interceptor, MK 1A, matching numbers and meticulously restored. Located in Victoria, BC Canada. Crating and shipping arranged. Pictures available. $7500 US
• SOLD !!
  
• Location: Saanichton, BC, Canada--

  Robin Mullett
  
  Good day Royal, just to let you know I have sold the 1968 RE Series 1A to a
  collector of Brit-Iron in Detroit Michigan.

• Wanted:
  Does anyone have Interceptor tools number W. 49925 Tappet guide extractor that I can borrow as valid comparitor to make a copy from? Also E. 5425 Pump disc lapping tool. (Or any of the tools at the back of the shop manual).
  Cheers
  Rick Fisher
  70 MK II
  
  
• Location: ???

• Swap:
  Message: I have a genuine Rickman Metisse Interceptor II. I adore it. However 90% of my riding is 2 up, and frankly, it's too small!!! I therefore need to do something about it.............
  
  I will consider a direct swap (with cash adjustment)for an equally impressive condition (i.e. engine mods etc.) RE Interceptor II in either UK or US spec. I just might consider a direct sale IF there's an Interceptor II waiting
  in the wings somewhere
  
  It is the orange one!

  The frame no. is R1033 (certificate of authentication).

  The engine no. is 1B2483X (the "X" is perhaps the most important part as
  it confirms it was one of the last models for "export".

  The bike was manufactured on 26.11.1970 and first registered in 1973. Sorry no Picture at this stage.

  
  
• Location: Normandy, Surrey, England.. --Rob

• For Sale: I have a nice 1968 750 twin that needs to be put back together all work has been prof. done ..very clean cromed and polished , have a stock frame .Also Have a 56 500 twin with frame with a new crank $2500.00 or best offer
• Location: Hilton, NY, U.S.. --Dan

For Sale Interceptor II 1970 (25 September 2003)
| [Friday, 25 September 2003 10:29 PM]

SOLD

• For Sale: 1970 Royal Enfield Interceptor 750 Series 11
• Location: Victoria, British Columbia, Canada
  
• Description:

  $5000U.S An unrestored bike that is in very good condition and excellent runner. It is a matching numbers , Series 11 which is the wet sump model with Norton front forks with double leading brake and rear wheel.
  

   

  This model has the factory oil cooler, sump guard, grab rail and air filter box (not shown in picture).New chain, battery, swing arm bushes. Some rechroming, rebuilt front end, Boyer electronic ignition. Complete and original factory tool kit. This was the last year of production for the British Enfield.
  A very collectable year.
  e-mail me for further details.

For Sale Interceptor Magazines (25 September 2003)
| [Friday, 25 September 2003 10:29 PM]

• For Sale: Motorcycle magazines with Interceptor Ad's and articles
• Location: Victoria, British Columbia, Canada
  
• Description:

  Yr                               Mag
  1963 ad 12/20/62 Motorcycle
  1963 rt 12/20/62 Motorcycle
  1965 ad 05/01/65 Motorcycle
  1967 ad 09/01/67 Motorcycle
  1968 ad 09/01/68 Cycle
  1970 rt 12/01/69 Motorcycle Sports
  1970 ad 12/01/69 Motorcycle Sports
  1969 rt 05/01/69 Cycle
  1969 rt 05/01/69 Motorcyclist Illustrated
  1969 ad 08/01/69 Cycle Guide

  there is a whole lot of other MC Mags from 1938 onwards
  
  e-mail me for further details.

• Wanted:
  Need a set of spare heads for my '68 Interceptor. Valve cover studs must be good and no broken fins.
  
• Location: Holliston, Mass, U.S. -Rossoman
  

• For Sale: I have a '65 Interceptor that isn't running. Bought it as a project- don't have the time. Will be putting it on Ebay this weekend along with a '59 Indian that is in super shape. $2000 for the Interceptor, no title.
  (See Picture)
• The Indian was a wall decoration in a bar in San Francisco, has extremely low mileage- it's close to new in condition, approx. 2K mi.! , $3500 for the Indian. (See Picture) ---- SOLD---
• Location: Albuquerque, New Mexico, U.S.. --Glenn

• Wanted: Series 11 gas tank USA chromed model.1969 bike , ALSO Pair of Boranni alloy rims wanted for a series 11
  interceptor, wm2-19 wm3-18
• Location: Wolverhampton. --RAY

• Wanted: Want to purchase Interceptor II ,
• Location: Effingham, NH, USA --David

For Sale Interceptor 1A (25 July 2003)
| [Friday, 25 July 2003 10:29 PM]

• SOLD - 22 AUG 03

• For Sale: Royal Enfield Interceptor 1A -up for grabs,
• Location: US, Central FL
  
• Description:

  I have a Interceptor 1A sitting in my garage. It has been in storage since 1968. The bike is complete (less battery) and would be perfect for someone with the desire and time to work on it, or maybe just a parts bike.
  It is located in Central FL. Any offer will be considered but whoever gets it must arrange for pick up and haul away. It is only worth what someone will pay, all offers considered.
  I can provide pictures and some information on the bike if any one is interested.
  I am going to place it on EBay in couple of weeks if no one in the group wants it.
  Contact information: Mike Williams

• WAnted:"Royal Enfield - Post War Models"
• Location: Howell, NJ, USA
  
• Description:

  Would anyone happen to have a spare copy of Roy Bacon's "Royal Enfield - Post War Models" that they would be willing to part with? I'm willing to pay but not interested in buying the Hard Bound edition on ebay and I haven't seen a copy of the soft bound in quite some time. Any help would be appreciated.

  Rick

• For Sale/WAnted: 1971 R.E. motor basketcase, Wanted -68 parts,
• Location: Saint Helen, MI, USA
  
• Description:

  For sale or trade. 1971 R.E. motor basketcase. Looking for parts for a 1968 R.E. 750.
  Andy

• WAnted: Royal Enfield Interceptor 750 (Original),
• Location: Röthis, Austria
  
• Description:

  Im looking for a original Royal Enfield Interceptor 750. Please, if you now an original old Interceptor to buy, please send me a mail back. Many thanks .

  Reinhard Kopf

• WAnted: Royal Enfield Interceptor handlebars,
• Location: Wiltshire, UK
  
• Description:

  Wanted high rise, wide handlebars that clamp on to top of fork tubes, as originally fitted to 1970 Rickman Interceptor, also any front or back brake hydraulic parts.

  Dan

• WAnted: Royal Enfield Interceptor 1969 750cc, Timing Cover Plate
• Location: Lemon Grove, CA, USA
  
• Description:

  I just found this site while searching for royal enfield parts. Finally! A site that is for 750 interceptors. I have a 1969 that i obtained from the original owner in 1973.i am in need of the timing plate cover which has the red re stamped into the metal.any help with this would be a blessing.this is all i need to put it back on the road,and start turning heads again.

  Jack Spivey

SOLD

• Selling: Royal Enfield Interceptor 1969 750cc
• Location: Washington (state), USA
• Price: US $6,500.00
• Serial Numbers: Frame - 1672, Engine - 1B 1672. Title is clear of all liens.
  
• Description:

  Motorcycle professionally restored in 2001. Included in sale price are a spare engine, two transmissions, and many, many other smaller parts. Frame was powder coated, engine is built to factory spec. Engine and transmission covers were polished. Fasteners are all British thread.

  This RE was restored using all factory original parts to the best of myknowledge. The bike is completely stock. There are no new modern parts on it other than the new pipes purchased from England. It was restored by a Canadian firm that specializes in British bikes. The bike has 14,000 miles on it and only 35 miles since it was restored. Also included is an origional Floyd Clymer "Workshop Maintenance Manual for the Royal Enfield 736 c.c. "Interceptor" Motor Cycle" and an origional "Instruction Book for the Royal Enfield 1958-59
  "Meteor Minor".........1963-64 "Interceptor" Motor Cycles" (i.e., the Driver's Manual). These are NOT for sale separately. There is a ding in the fuel tank that was chromed over.

  Regards Will

Load of Interceptor parts.
 [Pictures] | [Wednesday, February 12, 2003 at 05:15:34 ]

SOLD

• Selling: Load of Interceptor parts.
• Location:Van Nuys, CA USA
  
• Description:
  
  I have come into possession of a load of Interceptor parts. I am a Triumph man and have no knowledge of them. i have a frame, complete with swingarm, (but NO seat/fender rail) a pair of nice heads (missing two rocker covers but no broken fins), a number side case half (no other half darn it!!) an inner and outer primary in nice shape (outer is chromed and kinda old) and a transmission that is definately RE but perhaps not Interceptor, several barrels, but all with broken fins (fixable??). pair of nice heads: good condition, greasy and dirty but all fins are there. Missing rocker caps on both intake sides. Vales and guides in place.

  I also have lots of specialized bolts and nuts and studs and brackets that may or may not be for the Interceptor. There is also a tank, but I cannot tell if it is Interceptor or not. How do i tell?? The frame appears un molested with no major modifications but there may be addditions to it of little lugs, etc. Nothing was raked or cut off.

  Tranny: Good shape, turns, shifts, etc. Shafts in good nick, box is NOT cracked.

  Primary covers. Inner and outer. Chrome is fair. pics make it look worse than it is.

  Primary side case: Number is YA15300. Pretty good shape.

  Crank assembly with rods and barrels. Not pictured. Rusty but not pitted. Rods look good and fit tight with saftey wires (?). Barrels have busted fins and do not look too nice.

  Please indicate that I have several other parts, like motor mounts, etc. Also indicate that I will help arrange shipping anywhere in the world. Buyer to pay all shipping expenses. Please list parts as a "MAKE OFFER" situation. I am NOT looking to GET RICH but would like a FAIR PRICE and always appreciate selling to the end user.

  
  .("Wes")

Return to Index

Pair of Standard Pistons.
 | [Sunday, February 2, 2003 at 01:03:17]

• Selling: Pair of High Quality Pistons
• Location:Cardiff, Wales
• Description:
  
  Anyone interested in a pair of standard pistons( NOT oversize), specially made from top quality materials? I want a pair but they can only be ordered in fours! Price around £230 British Pounds + Postage etc. ($350 US). Price is for the pair. These are made as a set, from high-quality material and should easily outlast originals (from which the design is taken). e-mail feedback page for phone and e-mail address.
  
  .("Dave")
  
  Return to Index
  REPLY TO AD!